Steel products

Fasteners in stainless steel A2 and acid resistant steel A4, in black steel, also galvanised, and in steel with improved mechanical properties. Available strength classes 5.6 ; 5.8 ; 8.8 ; 10.9 ; 12.9. Products manufactured exclusively to DIN , PN-EN and ISO standards.

We offer two types of gratings:

• Welded gratings are made on the basis of the National Technical Assessment ITB-KOT-2019/1149 edition 1;
• Pressed gratings are made based on the technical approval ITB AT-15-9749/2016.

 

Grating brackets are also available:

• - standard handle,
• - clip holder,
• - hook handle.
  

Our offer also includes stair treads made on the basis of technical approval ITB AT-15-5259/2014 or ITB AT-15-9749/2016.

Typical step dimensions:

• widths: 600/800/900/1000/1200 mm
• depths: 205/240/270/295/305 mm
  

Designations of ordering options for gratings and steps:

KNZ / KNO - unframed grating (K- grating; N- unframed; Z-grooved/O-rounded);

KOZ / KOO / KOK - framed grating (K-grating; O-framed; Z-grooved/O-round/ K-square);

SOZ - stair tread;

AKP - boarding (standard 50×3 projecting 50 mm above the surface of the grating/stair tread);

MAG - border stopping below the bottom edge of the grating;

ASP - anti-slip strip, in the front of the stair tread / grating / tread;

ASP-out - moulding in the front of the stair tread / trellis / rest. (Like ASP, but without the perforated top section);

WBB - additional bar welded from the bottom with cross wires between the supporting flat bars;

SM - perforated strip welded from the bottom to the transverse bars between the supporting flat bars;

SERR - top edge of supporting flat bars SERRATED GRATE, with cut-outs to increase the grating's slip resistance;

X-X - symmetrical grating in the direction of dimension B, if the width of the grating is different than that resulting from the cutting of the meshes, the outer meshes have the same dimension other than 34.3 mm;

Y-Y - grating symmetrical in the direction of dimension L, the ends of the supporting flat bars (or border) are at the same distance from the nearest transverse bar;

h - height of supporting flat bar;

g - thickness of supporting flat bar;

L - length of grating / stair tread, dimension of supporting flat bar;

B - width of grating / stair tread, dimension of transverse bar;

straight cut-outs - cut-outs with straight lines in the grille forming its shape other than a rectangle;

curved cut-outs - cut-outs in the grille and lines other than straight;

STD / FIN / ESP - type of side framing of stair treads and landings.

 

We look forward to hearing from you!

Pipeline elements for industrial installations

The offered fittings are manufactured in compliance with the European Community Directive - PED 97/23/EC. Additional certificates such as AD W2000, 3.2., NACE MR 0175 and ultrasonic or impact tests possible.

• Bends acc: EN 10253-2 Type A, EN 10253-2 Type B, DIN 2605-1, DIN 2605-2, ANSI B16.9
• Bends acc: KER 80/2.05
• T-pieces acc: EN 10253-2 Type A, EN 10253-2 Type B, DIN 2615-1, DIN 2615-2, ANSI B16.9, KER
• Pipe junction acc: PN-EN 10253-2 Type A, PN-EN 10253-2 Type B, PN-64/M-35411, PN-75/M-35412, DIN 28013, DIN 28011, DIN 2617, ANSI B16.9
• Flat flanges acc: PN-87/H-74731, PN-EN 1092-1, PN-ISO 7005, DIN 2576
• Blinding flanges acc: PN-87/H-74728, PN-EN 1092-1, PN-ISO 7005, DIN 2527
• Neck flanges acc: PN-87/H-74710, PN-EN 1092-1, PN-ISO 7005, DIN 2631 - DIN 2637, ANSI B16.5
• Loose flanges acc: PN-87/H-74737, PN-EN 1092-1, DIN 2642
• Threaded flanges acc: PN-87/H-74734, DIN 2566
• Symmetrical reductions acc: PN-EN 10253-2 Type A, PN-EN 10253-2 Type B, DIN 2616-2, ANSI B16.9, KER
• Unsymmetrical reductions acc: PN-EN 10253-2 Type A, PN-EN 10253-2 Type B, DIN 2616-1, ANSI B16.9, KER
• Couplers acc: EN 10241
• Spigots acc: EN
• Flat flange with drill-bit, workshop-finished version
• Other components for plant construction acc. to KER such as feet, suspensions