With a thickness of 1.5 to 400 mm, standard formats 1000x2000; 1250x2500; 1500x3000; 1500x6000; 2000x6000; 2000x12000; 2500x12000; 3000x12000, manufactured in accordance with EN10051:1997, EN 10029
Hot-rolled corrugated sheets - rhombus, teardrop
Thickness from 2 to 12 mm, standard formats 1000x2000; 1250x2500; 1500x3000; 1500x6000; 2000x6000
Cold-rolled sheets
Thickness from 0.4 to 3.0 mm, standard formats 1000x2000; 1250x2500; 1500x3000 other formats and rolls / coils of different widths and lengths made to order, manufactured according to EN10131:2008
Wear-resistant plates
In thicknesses from 3 to 120 mm, standard formats 1000x2000; 1250x2500; 1500x3000; 1500x6000; 2000x6000; 2000x12000; 2500x12000; 3000x12000, hardnesses available 400 HB, 450 HB, 500 HB, 550 HB and 600 HB
Decorative metal sheets
Stainless steel in thicknesses from 0.5 to 2.0 mm , standard formats 1000x2000; 1250x2500; 1500x3000, decors 2WL, 5WL, 6WL, Cambridge, Checks, Raindrop, Squers, Satin, Linen / canvas and leather
Galvanised sheets
In thicknesses from 0.4 to 3.0 mm, standard formats 1000x2000; 1250x2500; 1500x3000, 1500x6000, in accordance with EN 10346:2009, EN10143:2006
Trapezoidal sheets T8, T14, T18, T35 and T55
In thicknesses from 0.5 to 1.25 mm, widths from 1054 (1020* ) to 1195 (1177* ) total width ( * coverage width ) depending on the embossed height, sheet lengths to order - max. 6000 mm
Cold-rolled strips
Cut from coils, thickness from 0.4 to 4.0 mm and width from 30 to 1650 mm, manufactured according to EN10131:2008
Hot-dip galvanised strips
Cut lengths with a thickness of 0.4 to 4.0 mm and a width of 30 to 1650 mm, manufactured in accordance with EN10143:2006
Round-rolled bars
From fi 6 to fi 250 mm as standard acc. to PN-H-93000:1994 and acc. to PN-H-93001:1985 or on request acc. to customer requirements
Square-rolled bars
From 6x6 to 80x80 mm, acc. to EN 10059:2005
Round bars
From fi 20 to fi 300 mm, surface k12 and h9, h11, h13 acc. to EN 10221 class C or acc. to customer's requirement
Round bars / Drawn round bars
From fi 3 to fi 130 mm, surface h8, h9, h11, can also be drawn and ground in tolerance h6, h7
Square drawn bars
From 5x5 to 100x100 mm, surface h11
Flat drawn bars
From 10x4 to 200x25, surface h11
Hexagonal drawn bars
8 to 95 mm, surface h11
Wedge-shaped bars
5x5, 8x7, 10x8, 12x8, 18x7, 18x11, 20x12, 25x14, 32x18, 36x20 mm, surface h9 and h11
Forged round bars
From fi 50 to fi 850 mm and square and flat bars from 50x50 to 170x1300 mm
Flat bars
From 25x3 to 50x200 mm, made according to EN 10058:2005
Square rolled billets
Hot-rolled square bars from 50x50 to 300x300 mm
Seamless pipes
Diameters from fi 13.5 to fi 813 mm / walls from 2.0 to 100 mm, acc: EN 10210-1,2: 2007; EN 10297-1: 2005; EN 10216-1,2,3: 2002
Seamless precision cold-drawn tubes
From fi 6 to fi 90 mm / wall thickness from 1.0 to 10 mm, acc. to EN 10305-1
Welded tubes
Diameters from fi 17.2 to fi 1420 mm / walls from 0.8 to 25 mm, acc. to EN 10219-1,2: 2007; EN 10217-1,2,3,4,5: 2002
Cold-formed hollow sections
according to EN 10219
Hot-rolled hollow sections
according to EN 10210
Precision closed profiles
according to EN 10305-5
square tubes from 10x10 to 400x400 mm/ wall from 0.8 to 20 mm
rectangular tubes from 20x10 to 500x300 mm/ wall from 0.8 to 20 mm
Semi-enclosed profiles, so-called gantry profiles
dimensions 30x30x10x2 ; 60x60x22.5x4 ; 70x70x22.5x4 and 80x80x27.5x5 mm
Cold bent angles
manufactured according to EN 10162:200
Isosceles angles with dimensions from 20x20 to 70x70 mm, wall thickness 2, 3, 4 mm
Non-right angle bars with dimensions from 20x15 to 70x50 mm, wall thickness 2, 3, 4 mm
Hot-rolled angles
Manufactured in accordance with EN 10056-1:1998 , EN 10056-2:1994
Equal-sided angle bars with dimensions from 20x20 to 300x300 mm, wall thickness from 3 to 35 mm
Non-right angle bars with dimensions from 30x20 to 200x100 mm, wall thickness from 3 to 16 mm
Cold-bent channels
From 30x20 to 160x60 mm, wall thickness 2 to 5 mm, manufactured according to EN 10162:2005
UPN hot-rolled channels
From 40 to 400 mm, manufactured according to EN 10279:2000
Hot-rolled flats
from 20x3 to 400x60 mm, manufactured in acc. with EN 10058:2005
T-square tees
From 20x20 to 140x140 mm, manufactured in acc. with EN 10055:1999
I-beams HEA, HEB, HEM
From 100 to 1000 mm, manufacturing according to EN 10034:1993
IPE I-beams
From 80 to 750 mm, manufacturing according to EN 10034:1993
IPN I-beams
From 80 to 600 mm, manufacturing according to EN 10024:1995
